Vct Flooring Installation Instructions

For removal instructions refer to the Resilient Floor Covering Institutes publication Recommended Work Practices for Removal of Resilient Floor Coverings.

Vct flooring installation instructions. You may have to notch a tile for an inside or outside corner or to cut around a cabinet. Then measure and cut the partial tiles needed to fill out to the border line. When installing directly over wood subfloors the moisture content of the subfloor should be13 or less.

The area to receive resilient flooring should be maintained at a minimum of 65F 18C and a maximum of 100F 38C for 48 hours before during and for. Photo 8 shows how. Roll the floor immediately after the installation is complete for Vinyl Composition Tile with Diamond 10 Technology Residential Tile and SAFETY ZONE in both directions within the adhesive working time using a 100-lb.

Armstrong Vinyl Sheet Flooring Installation Instructions. Many will vacuum up a floor and call things good. Use established reference points and install the flooring.

VCT Standard Tile may be laid in the same direction or tiles may be quarter turned to create a checkerboard pattern. TILE FLOORING Installation Instructions Released May 2013 Page 1 of 2 Expressions VCT INST 050713 Handling and Storage 1. Spread the VCT adhesive On the underside of most VCT tiles youll usually find dry back application.

It is probably covered with some loose grit. Allow all flooring materials and adhesives to condition to the room temperature a minimum of 48 hours before starting the installation. The information on this sheet provides general guidelines.

Minimum of 90 days prior to installation. The allowable readings for the installation of Armstrong flooring are 5 to 9 on the pH scale. Install the tile along the chalk lines laying the field area first and then fitting in the border tile.