Garden Glow Patio Heater Instructions

The official manual states this patio heater will run on either Propane or Butane.

Garden glow patio heater instructions. A Thoroughly Stylish patio heater with visible flame in a quartz glass tube looks superb finished in stainless steel for easy cleaning and weatherproofing and with an adjustable output up to 13Kw That brings instant heat to an outdoor area as well as the comforting glow of real flames. With a full cylinder in place turn on the gas and listen at the burner attempting to hear the sound of the gas arriving. With The Pilot Ignition System The ignition system is built-in and is a part of the valve control system.

Z Any guard or other protective device removed for servicing the heater must be replaced prior to operating the heater. With an incredible choice of outdoor heating with cosy firepits stylish log burners patio heaters chimeneas and more you can do just that. Turn on the ignition system clockwise and here is what you should do- Push-turn the control knob into position and keep it for 45 seconds.

Unlike the Kingfisher 4kW table top heater which is constructed from steel and then powder coated this heater is built from stainless steel and aluminium offering superior rust protection. Pull the cap off the valve. Gas patio heaters should be cleaned with a soft moist rag.

Do not transport heater while its operating. If you are unsure on which heater you require or if you need advice on a particular heater please call us on 020 7183 5790 - Wed be happy. It is also a good idea to check for debris in the burner before lighting the heater.

Hold the heater upright insert the heaters. Keep solid combustibles such as building materialspaper or cardboard a safe distance away from the heateras recommended by the instructions. Always follow the installation instructions.

Remove the valve cap and attach the heater to the tank. The unit has integral wheels for easy movement once cool. Patio Heater Lighting Instructions.