Diy Farmhouse Bench Legs

Cut 2x4s into 2 parts of 43 14 inches and 2 parts at 75 inches for the apron.
Diy farmhouse bench legs. Legs The notches and stretchers on the legs is optional. For each leg youll need your 155 inch boards one 14 inch board and one 125 inch board. Use your Kreg Jig to drill your pocket holes in the ends see cut list.
Place the legs in the corners of the top and square them off with the apron. 5 out of 5 stars. Make all of your cuts to length.
How to Build a Farmhouse Bench. Download the building plans linked above and follow the step-by-step instructions found there. Bench top after stain application.
You will need to do this to. Apply 2 coats of Annie Sloan Chalk Paint in Old White on bench legs and apron. Once you have both short sides done screw the long boards in the same way leaving about ⅛ from the corner.
Were loving the new benches we built to go with our diy farmhouse table. Rip down each side of your 2x8x10 and 2x4x10 with your table saw as directed in the cut list to create a straight edge. This will differ depending on the leg.
Cut boards for the frame. Diy farmhouse bench legs. Cut the legs to the desired height of the bench.